Input Mode - Denon AVR-891 Owner's Manual

ENGLISH
Input Setup
Setting items
Resolution Auto : The number of pixels the TV connected to the HDMI output
Set the output resolution. connector supports is detected automatically and the appropriate output
Resolution (Analog) : resolution is set.
Analog Video 480p / 576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output resolution.
Resolution (HDMI) : HDMI
BD z DVD z
TV • This item can be set when "i/p Scaler" is set to anything other than
"OFF".
SAT/CBL DVR
• When "i/p Scaler" is set to "Analog & HDMI", the resolution of both the
GAME z V.AUX DOCK
analog video input signal and HDMI input signal can be set.
• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video
signals.
• When set to "1080p/24Hz", you can enjoy film-like pictures for film
sources (in 24 Hz). For video sources and mixed sources, we recommend
setting the resolution to "1080p".
• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output
at a resolution of 1080p/50Hz.
Auto : The video signal is automatically detected and the appropriate
Progressive Mode
Set an appropriate mode is set.
progressive conversion Video1 : Select mode suitable for video playback.
mode for the source video Video2 : Select mode suitable for video and 30-frame film material
signal. playback.
BD z DVD z
This item can be set when "i/p Scaler" is set to anything other than
TV
"OFF".
SAT/CBL DVR
GAME z V.AUX DOCK
Full : Output at 16:9 aspect ratio.
Aspect
Set the aspect ratio for the Normal : Output at 4:3 aspect ratio.
video signals output to the
"Aspect" can be set when "i/p Scaler" is set to anything other than
HDMI.
"OFF".
BD z DVD z
TV
SAT/CBL DVR
GAME z V.AUX DOCK
z "BD", "TV" or "GAME" can be set when "HDMI" (vpage 46) or "Component" (vpage 47) has been
assigned.
48
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)

Input Mode

The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
• "HDMI" can be set for input sources for which "HDMI" is assigned at
"Input Assign" (vpage 46).
• "Digital" can be set for input sources for which "Digital" is assigned at
"Input Assign" (vpage 46).
• If the input source is set to "TV" or "Game", it cannot be set to "Analog".
• When digital signals are properly input, the
the display. If the
connector assignment and the connections.
• If "HDMI Control" is set to "ON" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV" is fixed to ARC.
Auto : Detect type of digital input signal and decode and play automatically.
Decode Mode
PCM : Decode and play only PCM input signals.
Set the decode mode for
DTS : Decode and play only DTS input signals.
input source.
BD DVD TV
• This item can be set for input sources for which "HDMI" or "Digital" is
SAT/CBL DVR
assigned at "Input Assign" (vpage 46).
DOCK GAME V.AUX
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
inputting the corresponding input signal.
CD
Rename
Change the display name of the selected input source.
Setting items
Rename • Up to eight characters can be input.
Change the display name of • For character input, see page 43.
the selected input source.
Default Yes : Reset to the defaults.
The input source name No : Do not reset to the defaults.
is returned to the default
setting.
Confirm the setting
Default settings are underlined.
Setting details
indicator lights on
indicator does not light, check the digital input
Setting details
Return to previous menu