Denon AVR-891 Owner's Manual page 54

Setting items
n For 2-channel sources
S.Back
Sets the method of
ON : The surround back channel is used.
generating of the surround
OFF : No signal is played from the surround back channels.
back channel.
n For Multi-channel sources
Set the decoding method for the surround back channel.
DSCRT ON : Play the surround back signals included in the 7.1-channel
source.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
z1
ES MTRX
surround channel signals of the DTS source.
ES DSCRT
6.1-channel DTS source.
z3
PLgx C
the signals in the Dolby Pro Logic gx Cinema mode.
PLgx M : Generate and play the surround back signals by decoding the
signals in the Dolby Pro Logic gx Music mode.
OFF : Do not play the surround back channel.
z1 This can be selected when playing DTS sources.
z2 This can be selected when playing DTS sources including a signal to
identify discrete 6.1-channel signals.
z3 This can be selected when "Speaker Config." – "S.Back" (vpage 56)
is set to "2spkrs".
• This can also be set by pressing
• If the source being played contains a surround
back signal, the decoder type is automatically
selected by the AFDM function. Set "AFDM" to
"OFF" to switch to your preferred decoder.
NOTE
If the setting in "Speaker Config." – "S.Back" (vpage 56) is "None",
"S.Back" is not displayed.
ON : Audio is output from the front height speaker.
F.Height
Determine whether to use OFF : Audio is not output from the front height speaker.
front height channel.
NOTE
• "F.Height" is displayed for the following settings.
• When "Amp Assign" (vpage 55) is set to "Front Height".
• When the "Speaker Config." – "F.Height" setting (vpage 56) is set to
other than "None".
• "F.Height" cannot be set if the HD Audio source being played includes a
front height channel. In this case, the Front height channel is played back
without decoding in PLgz mode, using the input signal.
Remote control operation
buttons
Setting details
: Generate and play the surround back signals from the
z2 : Play the surround back signals included in the
: Generate and play the surround back signals by decoding
STANDARD
.
Move the cursor
(Up/Down/Left/Right)
Setting items
Height Gain Low : Reduce the front height channel volume.
Control the front height Mid : Front height channel sound is output with standard sound volume.
channel volume. High : Increase the front height channel volume.
NOTE
"Height Gain" is displayed for the following settings.
• When "Amp Assign" (vpage 55) is set to "Front Height".
• When the "Speaker Config." – "F.Height" setting (vpage 56) is set to
other than "None".
• When surround mode is "PLgz" or the PLgz decoder is used.
Subwoofer ON : The subwoofer is used.
Turn subwoofer output on OFF : The subwoofer is not used.
and off.
Yes : Reset to the defaults.
Default
The "Surround Parameter" No : Do not reset to the defaults.
settings are returned to the
default settings.
n Tone
Adjust the tonal quality of the sound.
Setting items
ON : Allow tone adjustment (bass, treble).
Tone Control
Set the tone control function OFF : Playback without tone adjustment.
to ON and OFF.
"Tone Control" can be set when "Dynamic EQ" (vpage 52) is set to
"OFF".
NOTE
• "Tone Control" settings are not reflected to ZONE2.
• The tone cannot be adjusted in the direct mode.
Bass –6dB – +6dB
Adjust low frequency range
"Bass" can be set when "Tone Control" is set to "ON".
(bass).
Treble –6dB – +6dB
Adjust high frequency range
"Treble" can be set when "Tone Control" is set to "ON".
(treble).
Confirm the setting
ENGLISH
Audio/Video Adjust
Setting details
Setting details
51
Return to previous menu