Dell PowerEdge 2970 Hardware Owner's Manual page 71

6 Holding the sideplane in place, locate the USB connector on the sideplane (see Figure 6-4) and install
the USB memory key onto the board. See Figure 3-13.
7 Replace the sideplane into the system.
8 Reconnect the optical drive cable, if present.
9 Reinstall the SAS controller card. See "Installing a SAS Controller Daughter Card" on page 65.
10 Close the system. See "Closing the System" on page 56.
Figure 3-13. Installing an Internal USB Key
1
1 internal USB connector
4 sideplane
2
2 USB memory key
3
3 sideplane latch
Installing System Components
4
71