D-Link DWL-2100AP Manual page 34

RTS Length:
Transmit Power:
0.11g Only:
Preamble:
Radio:
Wireless QoS
(WMM):
*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead,
DWL-100AP User Manual
This value should remain at its default setting of 2346. If you
encounter inconsistent data flow, only minor modifications to the
value range between 256 and 2346 are recommended
Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power.
Check if all wireless devices are 802.11g. Uncheck if you are using a mixed
wireless network (802.11b and 802.11g).
Select Short and Long (default) or Long Only.
Select ON or OFF.
Select Disable or Enable from the drop-down menu.