Configure Wpa (Radius) - D-Link DIR-451 User Manual

Secton 4 - Securty
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1..Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
Click on.Wireless.Settings on the left side.
2. Next to Security Mode, select Enable.WPA-Personal.Security
or Enable.WPA2-Personal.Security.
3. Next to Cipher Mode, select TKIP,.AES,.or.Auto.
4. Next to PSK/EAP, select EAP.
5. Next to RADIUS Server 1 enter the IP Address of your RADIUS
server.
6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port.
7. Next to Shared Secret, enter the security key.
8. If you have a secondary RADIUS server, enter its IP address, port, and secret key.
9. Click Apply.Settings to save your settings.
D-Lnk DIR-451 User Manual

Configure WPA (RADIUS)

45