Wireless Settings - D-Link DIR-451 User Manual

Secton  - Configuraton
Enable Wireless:
Check the box to enable the wireless function. If
you do not want to use wireless, uncheck the box
to disable all the wireless functions.
Wireless Network Service Set Identifier (SSID) is the name of your
Name: wireless network. Create a name using up to 32
characters. The SSID is case-sensitive.
Wireless Channel: Indicates the channel setting for the DIR-451. By
default the channel is set to 6. The Channel can be
changed to fit the channel setting for an existing
wireless network or to customize the wireless
network. The Auto. Channel. Scan setting can
be selected to allow the DIR-451 to choose the
channel with the least amount of interference.
Super G Mode:
Super G is a group of performance enhancement
features that increase end user application
throughput in an 802.11g network. Super G is backwards compatible to standard 802.11g devices. For top performance, all
wireless devices on the network should be Super G capable. Select either Disabled, Super.G.without.Turbo, or Super.G.
with.Dynamic.Turbo.
• Disabled - Standard 802.11g support, no enhanced capabilities.
• Super.G.without.turbo - Capable of Packet Bursting, FastFrames, Compression, but no Turbo mode.
• Super.G.with.Dynamic.Turbo - Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo. This
setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled when all
devices on the wireless network are Super G with Dynamic Turbo enabled.
D-Lnk DIR-451 User Manual

Wireless Settings

15