DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide
Enabling IP Source Guard
To enable IP Source Guard:
1.
Click System > Management Security > IP Source Guard > Properties. The IP Source Guard Properties
Page opens:
Figure 69: IP Source Guard Properties Page
The IP Source Guard Properties Page contains the following field:
•
IP Source Guard Status — Indicates if IP Source Guard is enabled on the device. The possible field values
are:
–
Enable — Indicates that IP Source Guard is enabled on the device.
–
Disable — Indicates that IP Source Guard is disabled on the device.
2.
Define the field.
3.
Click
. IP Source Guard is enabled, and the device is updated.
Page 120