Community Strings And Trap Receivers - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide

Community Strings and Trap Receivers

Figure 7-38. Community Strings and Trap Receivers window
To use the functions on this window, enter the appropriate SNMP information in the Community
Strings and Trap Receiving Stations sections--you may enter up to four entries in each section. A trap
receiving station is a device that constantly runs a network management application to receive and store
traps. Then click Apply to put the settings into effect.
The SNMP Access Policy Setting information is described as follows:
♦ Community String A user-defined SNMP community name.
♦ Access Right The permitted access of Read-Only or Read-Write using the SNMP community name.
♦ Status Option to set the current community string to Valid or Invalid.
The SNMP Trap Manager Configuration information is described as follows:
♦ Trap Receiving Station The IP address of the trap receiving station.
♦ Community String A user-defined SNMP community name.
♦ Status Option to set the trap receiving station to Enabled or Disabled.
Web-Based Network Management 143