Cobra NavOne 2000 User Manual page 103

22 B Trail Mode 6/15/04 5:40 PM

Add waypoints . . . . . . . . At any place on the trail, while at the  Trail Mode screen
to the trail
1. Press the HERE function button to proceed to the  GPS Data screen
2. Press the SAVE function button to proceed to the  Save or Edit Name menu

At the  Save or Edit Name menu
Name the
waypoint



At the  Save or Edit Name menu
Accept the
d e fault name
1. Press ENTER or the SAVE function button to accept the

At the  Save or Edit Name menu
Enter a
user-defined
1. Press the CLEAR function button to clear the default name.
n a m e
2. Enter the name of choice using spell mode and press ENTER or the
The name will be saved and the system will return to the  Trail Mode screen
Page 86
:
The default name can be accepted.
A user-defined name can be entered.
:
default name and return to the  Trail Mode screen
:
SAVE function button.
:
.
.
.
.
86
 NOTE
An attempt to enter more
than 50 waypoints will result
in the  Trail Memory is
Full screen rather than
the  Save or Edit Name
menu when the SAV E
function button is pressed.