Carton Inventory - Chamberlain PD100 Series Owner's Manual

Carton Inventory

Your garage door opener is packaged in one carton
which contains the motor unit and the parts illustrated
below. Note that accessories will depend on the
model purchased. If anything is missing, carefully
check the packing material. Parts may be stuck in the
Lighted Door Control Button
with (2) 6ABx1-1/2" screws
2-Conductor Bell Wire
White & White/Red
Sprocket Cover
Safety Sensor
Bracket (2)
SECURITY
Single-Function
Remote Control Transmitter
Rail Brace (3)
T-rail
End Section (2)
Trolley
Chain and Cable in
Dispensing Carton
foam. Hardware for assembly and installation is
shown on the next page. Save the carton and
packing material until installation and adjustment is
complete.
Cable Pulley
Bracket
T-rail
Center Section
(each) (2)
Curved Door
Arm Section
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White
& White/Black Bell Wire attached
6
Light Lens (1)
Door Bracket
Header Bracket
Straight Door
Arm Section
Hanging Brackets
Safety Labels
and
Literature