Tape Operation - Aiwa CSD-TD55 Operating Instructions Manual

C

TAPE OPERATION

• Use Type I (normal) tapes only.
• The unit plays (records on) the side facing up.
PLAYBACK
1
Press TAPE.
The power is turned on.
2
Press PUSH EJECT to open the cassette
holder and insert a tape with the side to
be played facing out and the exposed
side facing down.
Press PUSH EJECT to close.
3
Press e PLAY/PAUSE to start
playback.
10
ENGLISH
PUSH EJECT
Tape counter
To set the tape counter to "0000"
Press s in stop mode. The counter is also set to
"0000" when opening the cassette holder.
s STOP/SET/CLEAR * – Stops play.
* or s STOP on the remote control (CSD-TD59 only)
e PLAY/PAUSE – Pauses play. During pause
mode, the tape counter flashes. To resume play, press
again.
f/g – Rewinds/ fast forwards. To stop the
winding, press s.
To start play when the power is off, press TAPE. The
power is turned on and play of the loaded tape begins
(Direct Play Function).
If you load a tape while the display flashes in step 2,
play starts without pressing e.
After listening, press POWER 6 STANDBY/ON to turn
the power off.