Hardware Installation - TRENDnet TEG-448WS Quick Installation Manual

2. Hardware Installation

Note:
1. After hardware installation is complete, use the Web-based Smart Utility to
configure the TEG-448WS. To access the Web-based Smart Utility, open
your web browser, and enter the default IP Address http://192.168.0.1 and
default password "admin". Make sure your computer and the TEG-448WS
are configured to the same network segment.
2. The Mini-GBIC slots are shared with Gigabit Ethernet ports 45, 46, 47 and
48. When the Mini-GBIC slots are in use, Gigabit Ethernet ports 45, 46, 47
and 48 are disabled.
1. Connect the Power Cord to the
rear of the TEG-448WS and
then to a power outlet.
2. Connect a CAT-5e/6 RJ-45
network cable from the computer to
an available Ethernet port of the
TEG-448WS.
2
English