Table of Contents
Advertisement
verification/diagnostic is not normal, then there
is probably an interrupt number conflict which
will have to be resolved manually by running
CMOS Setup Utility after installing all of the
expansion cards.
Specifications
IEEE 802.3 10BASE-T
Standards:
IEEE802.3u 100BASE-TX
ANSI/IEEE 802.3 NWay Auto-negotiation
IEEE 802.3x Full Duplex flow control
PCI Local Bus Rev.2.1, 2.2
Host interface:
32-bit PCI 2.1, 2.2. Bus Master
Wake-On-Lan:
Magic Packet
LinkChg
Microsoft wake-up frame
LED indicators:
Link, Activity
:
RJ-45
Media Interface
EMI
FCC Class B
Compatiblity:
CE Certification, Class B
VCCI Class B
Temperture:
Storage: -10°C ~ 70°C
Operating: 0°C ~ 50°C
Humidity:
10% ~90% non-condensing
Power
0.6 Watts (maximum)
Consumption:
2 layers
PCB Layer:
P/N:6012-N815100
Rev:A1-01
9
Advertisement
Table of Contents
