Table of Contents
Advertisement
15.8
Selecting options for ring tone and
vibrating alert
Another group of phone settings enables you to choose
a.WAV file to use instead of the default ring tone as the
ring type, and to adjust the ringer volume. This .WAV file
can be one you download from the Web or another source.
You can also select the vibrating alert pattern.
To select options for ring tone and vibrating alert
1.
Tap
then Settings. On the Personal tab, tap
Phone, then Ring & Phone Numbers.
2.
Drag the slider on the Ring volume slide bar to adjust
the ring volume. Speaker volume is independent of
ring volume and is adjusted separately.
3.
Place the stylus on the Play this .WAV file to ring
box to select a .WAV file to use instead of the default
ring tone. Tap the Play button to preview a WAV file
and Stop to end previewing it.
Note You can customise this list to include .WAV
files downloaded from the Web or other source. Use
File Explorer on your PC or notebook computer to
copy any .WAV files to Mobile Device/My Melodies
on your device when it is connected to your computer
(see "Finding and organising information").
4.
Select Vibrating alert to select a vibrating alert type.
By default, the phone uses both vibration and ringing
to notify you of an incoming call.
If you select Vibrate only, the Ring volume slider is
disabled, and the phone will vibrate only to notify you
of an incoming call.
If you select Vibrate + ring, the phone will vibrate at
the same time that it rings (the default). The phone
vibrates for about 1½ seconds, followed by no
233
Advertisement
Table of Contents
