Automatic Connection - Motorola WIRELESS BLUETOOTH CAR KIT CH1324A Manual

English

Automatic connection

After initial pairing, every time you start your vehicle, your phone and car kit will
automatically be connected (if your phone's relevant settings are not changed and it
is in power-on mode).
When the wireless connection is established, the Multifunction button remains lit.
If your phone is powered off when you start your vehicle, the Bluetooth connection
may not be automatically established when you turn on your phone.
To manually establish the connection:
Press the Multifunction Button after you turn on the phone.
The Multifunction Button begins to flash, and the car kit attempts to connect to your
phone.
If the wireless connection is established, the Multifunction Button will stop flashing
and remain lit.
If the connection is not established in 60 seconds, press the multifunction button
again to restart paging.
Disconnecting the car kit from your phone
To disconnect the car kit from your phone, press and hold the Voice dial Button for
more than 3 seconds. The car kit and phone are automatically disconnected when
you turn off the vehicle, unless you are in an active call.
9