Table of Contents
Advertisement
• If you want a different word (such as
Progress), continue pressing keypad keys
to enter the remaining characters.
• Press 1 to enter punctuation or other
characters.
tap mode
Press # in a text entry screen to switch to
TAP mode. If you do not see g or m, press M >
Entry Setup to set TAP mode as your Primary or
Secondary text entry mode.
To enter text in TAP mode, press a keypad key
repeatedly to cycle through the letters and
number on the key. Repeat this step to enter
each letter.
38
basics
For example, if you press 8 one time, your
phone displays:
Character
Message 765
displays at
T
insertion
point.
OK
Press
to
accept &
store text.
OK
After 2 seconds, the character is accepted
and the cursor moves to the next position.
numeric mode
In a text entry screen, press # to switch
entry modes until the 12 (numeric) indicator
displays.
Press keypad keys to enter the numbers you
want. When you finish entering numbers,
press # to switch to another entry mode.
DELETE
Press
to
erase the
character to left of
DELETE
insertion point.
Advertisement
Table of Contents
