Motorola V51 User Manual page 9

Menu Navigation
A large number of your phone's options are accessed by using menus which use a common
approach for selection, change and cancellation.
Please read this section carefully before attempting to access a menu option. When you
understand the common approach to menu navigation and how the menus are shown on the
page, you will be able to access and change options with ease.
$
Entering the Menus
Two different keys are used to access the menus:
enters the Options menu whilst in standby mode; enters the In-call menu
during a call.
E
enters the Quick Access menu.
Once entered, the menus use the
access, select and change individual options.
A <
Using ,
Leaving the Menus
To leave any of the menus, you can either press and hold the
C
key. Both of these actions will return your phone to the standby mode.
i
Alternatively, a quicker way to leave the menus is to press
Menus and Sub-menus
A menu is a simple list of options. Some of these options provide access to a further list of
options called a sub-menu. When navigating through the menus you may find it is helpful to
think in terms of menu levels - the 'parent' menu being on one level and its sub-menus being on
a lower level.
Moving To and Selecting a Menu Option
To move from one option to another on the same level, use the scroll key
<
and to move backwards. When you find the option you want, press the
it.
Depending on the option you select, one of three things will happen:
• either a brief message will be displayed confirming an action, for example
Completed.
• or a prompt will be displayed requesting you to enter information, for example
Enter PIN or Enter Name.
• or the first option of a sub-menu will be displayed. You can select this option using
the O key or browse through the other options using the scroll keys.
To leave an option or sub-menu, press the
item.
Menu Options with Security Codes
Some options are protected from misuse by requiring you to enter one of the security codes. To
use these options, you must enter the requested code before proceeding.
<
,
>
keys, looping of menus is possible both ways.
> O C
, and
C
C
key. This will take you back to the parent menu
keys in a common manner to
key or repeatedly press the
EC
.
>
to move forwards
O
key to select
Introduction
3