Motorola V3690 Manual page 68

        
Select Phone Line
Press . Select the Quick Access feature (
1/2?) or after the tone, say the Voice Tag name. See 'Voice
Control for Quick Access Features'.
This option allows you to switch between Line 1 and Line 2.
Availability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Adjust Ring Volume
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the side of
your phone.
Press followed by the appropriate volume button to
either increase or decrease the ringer volume.
English 66
Using the Options Menu
Ring or Vibrate
Switch Line Press . Select the Quick Access feature (
On/Off?) or after the tone, say the Voice Tag name. See
'Voice Control for Quick Access Features'.
This option sets the way your phone alerts you to an incoming
call. The options are:
• Ring Only - the phone will ring with the tone specified by
the Set Ringer Tone option.
• Vibrate Only - the phone will vibrate using VibraCall™.
• Vibrate Then Ring - the phone will vibrate twice and
then ring.
• No Ring or Vibrate - the phone will just display the
Call message.
The setting you choose also defines the type of alert for an
incoming SMS message (except that if you select Vibrate
Then Ring, your phone will just vibrate).
Set Ringer Tone
This option sets the tone your phone will make when an
incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone ... Music Tone
When selected, your phone will produce one of these alternative
ringer tones.
Vibrate