Printing Performance - Canon imagePROGRAF iPF510 User Manual

Printer Specications

Printing performance

Print method
Maximum resolution
Printhead
Number of nozzles
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Interface
Expansion Board Slots
USB 2.0(*1)
Ethernet
IEEE 1394 (*2)
*1: Use in USB 2.0 High Speed mode requires the following environment:
•
Computer: USB 2.0 High-Speed-compatible
•
Operating system: Windows Vista/Windows Server 2003/Windows XP/Windows
2000 or Mac OS X ver. 10.3.3 or later
•
USB 2.0 driver: Microsoft USB 2.0 driver (available from Windows Update or the Service Pack.)
•
USB cable: Certied USB 2.0 cable
*2: One IEEE 1394 (FireWire) expansion board can be installed.
Ink
Ink Tank BK Ink Tank ( Black Ink )
MBK Ink Tank ( Matte Black Ink, or
black ink for matte paper)
C Ink Tank ( Cyan Ink )
M Ink Tank ( Magenta Ink )
Y Ink Tank ( Yellow Ink )
Capacity
*1: The provided Starter Ink Tanks contain 90 ml (3.0  oz) each.
74 Printer Parts
Bubblejet
2400 dpi horizontally (*1) × 1200 dpi vertically
PF-03
MBK: 5,120; Others: 2,560 each color
1
Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)
Format Internal port
Specication IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
/Auto-Negotiation, IEEE 802.3x Full Duplex
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP, HTTP, TCP/IP,
AppleTalk
Format Optional boards (slot type)
Specication IEEE 1394-1995, conforms to P1394a Specication ver. 2.0,
half duplex, Data/Strb differential serial
Transfer speed 100/200/400 Mbps
Connector Conforms to IEEE 1394-1995 (6-pin), no power supply
Dye ink PFI-102BK (user-replaceable)
Pigment ink PFI-102MBK (user-replaceable)
Dye ink PFI-102C (user-replaceable)
Dye ink PFI-102M (user-replaceable)
Dye ink PFI-102Y (user-replaceable)
130 ml per color (*1)