Canon MultiPASS F50 Software User's Manual page 97

•
•
•
•
•
Chapter 5
Filename and Numbering
On the Scan to Save tab, in the Filename box, enter the base file
name you want to use to define your own preference for naming
files. For Numbering, click whether you want to continue
numbering from the previously saved file, or to begin the
numbering from the specified number.
MultiPASS uses a naming rule for automatically assigning file
names to scanned images that are saved as files. This rule
includes a base file name plus a sequential number.
For example, if you enter SavedScan as the base file name, and
you specify the numbering to start at 100, your subsequent image
files would be named: SavedScan100, SavedScan101, and so on.
Save as Type
If available, click the file format in which you want your scanned
image saved, such as BMP or TIF. This option is available only for
those scan destinations where saving the image file is
appropriate.
Image Type
If available, click the type of image you are scanning, such as
Black and White.
Image Quality (Resolution)
If available, click the resolution (in dots per inch, dpi) for the
image you are scanning. A higher resolution results in a better
image quality, but may take longer to scan. A lower resolution
generally scans faster, but may generate a lesser quality image.
Paper Size (if available)
Click the physical size of the image being scanned, such as letter
or business card size.
If you want to specify a custom paper size, click Custom. Then,
click the unit of measure by which you want to define your
custom paper size. In the Width and Height boxes, enter the
dimensions of your custom paper size.
Scanning 91