Displaying The Data Code - Canon MVX1S Instruction Manual

Displaying the Data Code

The camcorder maintains a data code containing recording date and time and other
camera data such as shutter speed and exposure (f-stop). When you play back a tape,
you can display the data code and select the data code combination you wish to display.
Available in the
Selecting the Date/Time Display Combination
MENU
( 62)
1. Press the MENU button and select [DISPLAY SETUP/
2. Select [DATA CODE] and select the data code combination.
3. Press the MENU button.
4. In
• In
• Pressing the FOCUS button again makes the data code disappear.
The data code will not display the next time you turn on the camcorder.
When the data code is being displayed, the level indicator will not display.
74
and
DISPLAY SETUP/
mode, play back a tape and press the FOCUS button.
mode, only date and time appear.
modes.
DATA CODE DATE & TIME
FOCUS button
].