Continuing Embroidery After Turning Off The Power - Brother ULT-2001 Operation Manual

Continuing Embroidery After Turning off the Power

Example: If the power goes off while sewing the second color
1. Select the pattern and press
2. Press to move the second color to the first position in the
display.
3. Use , , or
before where sewing stopped.
4. Lower the presser foot lever and start sewing.
CAUTION
To continue a pattern that has had its position changed (see page
5-26), move the pattern the same amount in the layout display
screen, then follow the steps above. In this case, you need to
make a note of the pattern's position before turning off the
power.
Note
Use the display to remember the last stitch number sewn
before you turn off the power. Then use the
keys to move the pattern to the same stitch number and con-
tinue sewing.
Embroidery
.
to advance the pattern to slightly
,
1 —
2 —
3 —
4 —
5 —
6 —
, , or
7 —
8 —
9 —
5-39