Brother ULT-2001 Operation Manual page 137

3-64
2. Use
stitch length display to choose the size of the eyelet.
Large 7 mm (1/4 inch), Medium 6 mm (15/64 inch),
Small 5 mm (3/16 inch) actual size.
3. Attach monogramming foot "N", then turn the balance
wheel to check the needle drop position. Lower the
presser foot lever and start sewing. When sewing is
finished, the machine sews reinforcement stitches and
1
stops automatically.
1 Needle drop position
4. Use the eyelet punch to make a hole in the center of
the stitching.
Sewing Utility Stitches
in either the stitch width display or the
A B
1 —
2 —
C
3 —
4 —
5 —
6 —
7 —
8 —
9 —