Order Of One Cycle; Sewing Stretch Fabrics - Brother PC-8500 Operation Manual

Order of one cycle

Sewing stretch fabrics

5
5
56
When sewing buttonholes onto stretch fabric, insert onto stretch
fabric, a gimp thread into the buttonhole seam ("
buttonholes only).
1. Hook the gimp thread onto the end of presser foot "A", insert
it into the groove at the front of the presser foot and
temporarily tie it there.
1 Upper thread
2 Bobbin thread
2. Lower the presser foot and start sewing.
* Set the stitch width to match the diameter of the gimp
thread.
3. Once sewing is completed, pull the gimp thread gently to
remove any slack, and trim any surplus length.
1
1
1
1 Reinforcement stitch
"