Manual Cutting; Adjusting The Label Length - Brother PT-2700 User Manual

LABEL PRINTING
When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, set "On" for
Manual Cutting before printing. After printing, remove the tape cassette from the
machine and use scissors to cut the tape.
1
Press the
"Manual Cutting" using the
press the
2
Select the value by using the
3
Press the
• Press the
• Press the
You can adjust the length of the printed label in levels of -5 to +5.
1
Press the
displayed.
2
Select "Adjust Length" by using the
then set the value by using the
3
Press the
• Press the
• Press the
• Approximately 1% of the total label length will be adjusted by 1 level.
64

Manual Cutting

Manual Cutting
key to display the setup menu, select
or
or key.
or key to apply the setting.
key to return to the previous step.
key to set the value to default setting ("Off").

Adjusting the Label Length

key. The current settings are
or key to apply the setting.
key to return to the previous step.
key to set the value to default setting.
keys, and then
or keys.
or keys, and
or keys.