Scan To Ocr - Brother DCP-8080DN Software User's Manual

Scan to OCR

When you choose Scan to OCR, your document will be scanned and sent directly to the PC you designated
on your network. ControlCenter3 will activate ScanSoft™ PaperPort™ 11SE OCR and convert your
document into text for viewing and editing from a word processing application on the designated PC. You can
change the Scan configuration. (See OCR (Word Processing program) on page 65.)
a
Load your document.
b
Press (Scan).
c
Press a or b to choose Scan to PC.
Press OK.
d
Press a or b to choose OCR.
Press OK.
If your machine does not support Duplex Scan, go to step f.
If your machine supports Duplex Scan, go to step e.
e
Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
f
Press a or b to choose the destination PC you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
Press OK.
g
Press Start.
The machine starts the scanning process.
Note
If you want the scanned data in color, choose color in scan type on the Device Button tab of the
ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in
scan type on the Device Button tab of the ControlCenter3 configuration. (See SCAN on page 62.)
Network Scanning (For models with built-in network)
4
4
92