Installing The Optional Memory Board - Brother DCP-8040 User Manual
Brother dcp-8040: users manual
Hide thumbs
Also See for DCP-8040:
- User manual (140 pages) ,
- Quick setup manual (54 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Installing the optional memory board
WARNING
■
DO NOT touch the surface of the main board within 15 minutes
after turning off the power.
1
Turn the DCP power switch off, unplug the DCP power cord
from the AC outlet, and then disconnect the interface cable.
WARNING
Turn the DCP power switch off, before installing (or removing) the
memory board.
2
Remove the side cover. Loosen the two screws, and then
remove the metal shield plate.
3
Unpack the DIMM and hold it by the edges.
OPTIONAL ACCESSORIES 15 - 2
Advertisement
Table of Contents
