Pre-Scanning To Crop A Portion You Want To Scan Using The Scanner Glass - Brother DCP-7030 Software User's Manual

Note
The scanner resolution can be set as high as 1200 dpi.
For resolutions greater than 1200 dpi, use the Brother Scanner Utility. (See Brother Scanner Utility
on page 41.)
m
Click the Scan button in the Scan dialog box.
The machine starts scanning the document.

Pre-Scanning to crop a portion you want to scan using the scanner glass

The Preview button is used to preview an image for cropping any unwanted portions from the image. When
you are satisfied with the preview, click the Scan button in the Scan dialog box to scan the image.
a
Follow the steps from a to g of Scanning a document into the PC on page 37.
b
Choose Flatbed in the Paper source drop-down list (1).
1 Paper source
2 Picture type
3 Adjust the quality of the scanned picture
4 Scanning area
c
Choose the picture type (2).
d
Click Preview.
The whole image is scanned into the PC and appears in the scanning area (4).
1
2
3
Scanning
4
2
2
39