Table of Contents
Advertisement
Installation
Manual Tune
1. Press the ▼PR▲ buttons to select
a programme number you want.
2. Select the Manual from the Install menu.
3. Press the VOL► button and the manual tuning
window appears.
4. Press the ◄VOL► buttons to search up or
down.
5. Searching will be stopped automatically after
finding the next channel.
6. When a new channel is found, a channel
memorizing window will appear.
7. Select save(Using the menu button) or cancel
(Using the blue button).
Note :
If you are unable to get any programs using Auto
Tuning because of a poor broadcasting signal, it is
possible to store the Manual tuning.
After auto search in France or Swiss, when you enter manual tune, if present channel is
SECAM L/L' , TV set can only search SECAM L/L' .
If you enter by other signal, TV set can search every signal except SECAM L/L' .
Fine Tune
1. Select a programme number you want to tune
finely with the ▼PR▲ buttons.
2. Select the Fine tune from the Install menu.
3. Press the VOL► button and the fine tuning
window appears.
4. Adjust the fine tuning with the ◄VOL►
buttons.
5. If you press down blue button, Fine Tune will
be canceled.
Note :
If you are unable to get a good picture or sound
because of a poor broadcasting signal, it is
adjustment of the fine tuning might improve it.
Picture
Auto Tuning
Sound
Edit
Screen
Manual
Install
Fine Tune
CH
Features
Move
Pr01
S24
Menu : Stop
Fine Tune
Pr : 01
Adjust
Menu : Save
20
Select
Menu:Save
Manual
327.25MHz
ARD
00
Cancel
Advertisement
Table of Contents
