Table of Contents
Advertisement
Preparation
1. Prepare the PC cable (D-sub 15pin) and the PC audio cable(Sold separately).
2. Connect the PC(Output) to the LCD(Input) as shown below.
3. Turn on the LCD and PC.
4. INPUT SELECT : Select [PC] by pressing the "MULTIMEDIA" button of the Remote Control or
LCD unit.
Each time you press the "MULTIMEDIA" button, a different input mode appears.
The sequence is as follows: Component1 > Component2 > PC RGB > DVI > Component1
PC
This set offers a variety of the resolutions in PC mode : 640x480(60,66,72,75Hz),
720x400(70,85Hz), 800x600(60,75,85Hz), 832x624(74Hz), 1024x768(60,70Hz), 576P(50Hz),
720P(50,60Hz), 1080i(50,60Hz)
NOTES:
1) The resolution of the PC monitor is best at 1024 x 768.
2) If there is a [Vertical Frequency]setting menu in the [Display] Menu of the PC, adjust the
frequency to 60Hz.
3) If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
Connecting PC(15Pin D-SUB)
Audio cable
D-sub 15pin
12
LCD TV
Advertisement
Table of Contents
