Before Starting; Technical Data - NuTone GSEH3K Installation Instructions Manual

1. BEFORE STARTING

1.1 I C
NSPECT THE
To avoid risk of suffocation, discard the plastic bag wrapping the unit.
• Inspect the exterior of the unit for shipping damage. Ensure there is no damage to the door, door latches, main switch, etc.
Remove the cardboard strip inside the unit (if applicable).
• Inspect the interior of the unit for damage. Ensure the blower assembly, heat recovery core (model GSHH3K), energy recovery core
(model GSEH3K), insulation, dampers (models GSVH1K, GSHH3K and GSEH3K), prefilter, HEPA filter, etc. are all intact.
• If the unit was damaged during shipping, contact your local distributor, or Broan-NuTone at 1-800-558-1711.

2. TECHNICAL DATA

Models
Weight
Oval shaped duct collars
for non-insulated ducts
to inside
Oval shaped duct collars
for insulated ducts
to outside
Installation: Suspended
or rest on a shelf or floor:
Electrical Supply
Power Consum. (Boost)
Power Consum. (Normal)
NOTE: Due to our ongoing commitment to product quality and innovation, all specifications are subjected to change without notice.
B
ONTENTS OF THE OX
1
VD0126
1) Cardboard strip
GSFH1K
HEPA Filtration
34 lb (15.4 kg)
N/A
170 Watts
132 Watts
WARNING
!
0
CAUTION
GSVH1K
HEPA Filtration
& Fresh Air
Ventilation
36 lb (16.3 kg)
fits two 8" round ducts
fits two 5" or 6" round ducts
Chains, springs and hooks (provided with the unit)
or 4 pads (provided with the unit)
120 Volts AC, 60 Hz
224 Watts
152 Watts
- 4 -
GSHH3K GSEH3K
HEPA Filtration, HEPA Filtration,
Fresh Air & Fresh Air &
Heat Recovery Energy Recovery
Ventilation Ventilation
40 lb (18.2 kg) 40 lb (18.2 kg)
229 Watts 224 Watts
170 Watts 170 Watts