Motorola RAZR V3XX - MANUAL 2 User Manual page 42

9.5.2
9.5.2 Setting Up a Wireless Connection
Your phone supports Bluetooth
called linking or bonding). You can pair your phone with a
Bluetooth headset or car kit, or pair your phone with a
computer to exchange and synchronise files.
Note: The use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the
laws and regulations on the use of these products.
Turning Bluetooth Power On or Off
Find the Feature
If Bluetooth Power is On, your phone can automatically pair
with the handsfree device you have used before. Just turn on
the device or move it near the phone.
Once you connect your phone to a Bluetooth device, your
phone "recognises" that device in the future. If a recognised
device starts a Bluetooth link with your phone, the Bluetooth
status icon appears at the top of your display.
Note: To extend battery life, use the above procedure and set
Bluetooth Power to Off when not in use. Your phone will not
44 Using and Transferring Files
TM wireless pairing (also
> Connectivity > Bluetooth
s
> Setup > Power > On
Setting Up a Wireless Connection
pair with devices until you set Bluetooth Power back to On and
pair your phone with the devices again.
Pairing With a Headset or Handsfree Device
Before you try to pair your phone with a device, make sure
the device is on and ready in pairing or bonding mode (see
the user's guide for the device). For maximum Bluetooth
security, you should always pair Bluetooth devices in a safe,
private environment.
Find the Feature
Your phone lists the devices it finds within range. Highlight a
device in the list and:
Press
1 Select
Yes or Ok
2
3 keypad keys
> Connectivity > Bluetooth
s
> [Add Audio Device]
To
select the device
pair with the device
enter the device passkey (such as
0000) if necessary, and then press the
Ok key