Table of Contents
Advertisement
get started
battery charging
New batteries are not
fully charged. Plug the
battery charger into
your phone and an
electrical outlet. It
might take several
seconds to start
charging. When
finished, your phone
plays an alert and
displays a full battery
^
icon
and Charge
Complete.
Tip:
Motorola batteries have circuitry that protects the
battery from damage from overcharging.
If your battery is completely drained, you cannot use a
USB cable plugged into a computer to charge your
battery. You must use a wall charger or car charger. If
your battery has some charge left, you can charge it by
using a USB cable plugged into a computer. Note that
some USB ports charge faster than others.
get started
conserve battery charge
Using certain features can quickly deplete your battery's
charge. These features can include downloading
music, using the camera, replaying video clips, and
using Bluetooth® wireless connections.
You can conserve your battery's charge:
• Reduce the backlight timeout (see your User's
Guide). When the backlight is off, the display is
visible but dim.
• Close unused programs using the task manager
(see your User's Guide).
• Extend the interval between automatically
sending and receiving e-mail (see your User's
Guide).
•
If you have more than one e-mail account set up,
choose only one account to automatically send
and receive messages.
• Turn off Bluetooth power when you are not using
it (see your User's Guide).
• Adjust the WiFi power settings by pressing Start >
Settings > Connections > WiFi power settings.
Notes for charging your phone's battery:
• When charging your battery, keep it near room
temperature. Never expose batteries to
temperatures below 0°C (32°F) or above 45°C
(113°F) when charging.
• New batteries are not fully charged.
• New batteries or batteries stored for a long time
may take more time to charge.
• Motorola batteries and charging systems have
circuitry that protects the battery from damage
from overcharging.
9
10
turn it on & off
To turn on your phone,
press and release
Tip:
If your phone does
not turn on, take your
battery out, put it back in,
and try again.
To turn off your phone,
press and hold
make a call
From the home screen, enter a phone number and press
N
to make a call.
Note:
To voice dial, press and hold the speaker key
A
(
). When prompted, say "Call, " followed by a number
or contact name. Use the on-screen prompts or see your
User's Guide for details.
11
12
get started
get started
O
.
Fn
O
for three seconds, then release it.
ò
CAPS
Advertisement
Table of Contents
