Changing Volume Button Orientation; Pairing Your Headset And Phone - Motorola H350 Manual

Changing volume button orientation

If you change your headset to wear it on the other ear, you can also change
the orientation of the volume buttons.
1 Turn the headset power off
2 Press the Call button and the volume button you want to assign as the
"volume" up button until the indicator light flashes twice.
The headset power turns on.

Pairing your headset and phone

Your phone's Bluetooth feature is off by default. Make sure the Bluetooth
feature is permanently turned on in your phone. Please check your phone's
user's guide.
Before you can use your headset, you must pair (link) it with your phone.
1. With the headset power off, press and hold the Call button for 5 seconds
until the indicator light turns on and remain steadily lit.
If the indicator light is flashing or does not remain steadily lit, turn off the
headset and repeat this step.
2. Perform a device discovery (or scan) from the phone. For details about
device discovery, consult your phone's user's guide. The phone lists
Bluetooth devices it finds.
e
t
3. Select Motorola H350 in the list of discovered devices and confirm by
r
following the on-screen prompts.
4. When prompted by the phone, enter the passkey 0000 and confirm.
When your headset successfully pairs with your phone, the indicator light
changes from steadily to flashing blue.
After you have successfully paired your phone and headset, you do not need
to repeat these steps each time you use the headset.
English
5