Earhooks And Your Headset; Wearing The Headset; Changing Volume Button Orientation - Motorola H670 User Manual

EARHOOKS AND YOUR
HEADSET
Your H670 headset is supplied with multiple
earhooks. The earhook is attached onto a hinge pin,
and is placed onto your ear when using your
headset. To install an earhook on your headset:
1
Open the attached
earhook 90 degrees from
the headset.
2
Gently lift and pull the
top of the earhook up
and off the upper hinge
pin. Then, pull it away to
remove it.
3
Position the headset for
right or left ear use (right
ear use is displayed).
4 Hook the bottom of the
earhook onto the lower
hinge pin, then lift and pull
the top of the earhook
over the upper hinge pin.
CHANGING VOLUME
BUTTON ORIENTATION
You can also change the orientation of the
volume buttons on your headset.
1
Turn the headset power off.
2
Press and hold the Volume button you
want to assign as the "volume up" button
and slide the switch toward the
microphone. The indicator light is either
steadily lit or flashing in blue.
Volume
Buttons
1 Open Earhook
2 Pull Earhook Up
Hinge Pin
Slide
Switch
WEARING THE
HEADSET
Once you have attached your desired
earhook, follow these steps to wear your
headset on your ear:
1
Open the attached
earhook 45 degrees from
the headset.
2
Loop the earhook over
your ear.
3
Press earhook to your ear.
When worn, your headset
will look like this on your
head:
European Union Directives
Conformance Statement
Hereby, Motorola declares that this
product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
The above gives an example of a typical Product
Approval Number.
You can view your product's Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product's label in
the "Search" bar on the web site.
1
2
3
Product
Approval
Number