Playing The Multi-Disc Changer - Bose Wave music system multi-CD changer Owner's Manual

AWMDC_OG.book Page 10 Monday, May 5, 2003 11:03 AM
Using Your Acoustic Wave

Playing the multi-disc changer

Use buttons on the multi-disc changer remote or console, as shown below.
Function
To play the selected CD.............................
Results:
• If there is no CD in the slot, the word
"DISC" flashes on the multi-disc changer
display.
• If there is a disc, the display shows the
current track playing and elapsed play
time.
Press again to pause.
To pause the disc while it is playing.........
Press again to resume play.
To stop the CD............................................
Results: In the display window, the CD and
track number still appear, while the elapsed
time returns to zero.
To mute the CD...........................................
To skip tracks on a CD...............................
Results: The display shows the new track
number and elapsed time.
To scan through a track.............................
Press and hold to scan backward
ward
or previous track(s).
To move to the next disc...........................
Results: CD number on the display
changes; LED next to the slot of the newly
selected CD flashes green, then stays lit.
To select a specific CD by number.............
Results: The CD in that numbered slot
begins to play.
10
®
Multi-Disc Changer
or for-
. Continue holding to scan the next
AUX 1 AUX 2
Play/Pause Stop Next Disc
Remote control Changer console
Changer
Play/Pause
Changer
Play/Pause
Stop
Not available
Track / Tune
ac / u e
(Press and Hold) (Press and Hold)
Next Disc
Not available
ON/OFF
CD Mode