Table of Contents
Advertisement
CHANNEL MEMORY(SET UP)
FINE TUNE
If the reception is clear, you do not have to fine-tune the channel, as this is done automatically
during auto program and manual memory.
If however the signal is weak or distorted, you may have to fine-tune the channel manually.
1. Press CH
/
buttons or Press the 10-Digit keypad button to adjust a channel you want.
2. Press TV MENU button and move the cursor to "SET UP" option and press VOL + or
button, then the "SET UP" menu is displayed.
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE
ENGLISH
: MOVE
: SELECT
: EXIT
3. Press CH
/
buttons to place the cursor on the "FINE TUNE" option.
4. Use VOL +/- or
buttons until you obtain a sharp and clear picture and good sound quality.
SET UP
ANTENNA
CATV 2
AUTO PROGRAM
FINE TUNE
0
A/D:MEMORY
: MOVE
: ADJ.
:PREV.
5. If you wish to memorize adjusted FINE TUNE state, press "A/D" button, and then the memorie
icon is displayed.
If you wish to initialize it, press that button again, and then the icon disappear.
NOTES
The memorized channel does not operate AFT(automatic frequency tuning)mode.
The FINE-TUNE is operated only selected channel.
After the "AUTO PROGRAM", the memorized channel operate AFT(automatic
frequency tuning)mode automatically.
19
SET UP
ANTENNA
CATV 2
AUTO PROGRAM
FINE TUNE
0
: MOVE
: SELECT.
:PREV.
SET UP
ANTENNA
CATV 2
AUTO PROGRAM
FINE TUNE
+1
A/D:MEMORY
: MOVE
: ADJ.
:PREV.
PICTURE ADJUSTMENT 1
USING ON-SCREEN MENU
You can sequentially select any one of the four possible preferred analogue picture presets.
1 1
1 1
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE ENGLISH
: MOVE
:SELECT
: EXIT
2 2
2 2
PICTURE
PICTURE
STANDARD
CONTRAST
75
BRIGHTNESS
50
SHARPNESS
50
COLOR
50
TINT
0
: MOVE
: ADJ.
: PREV.
3 3
3 3
PICTURE
PICTURE
DYNAMIC
CONTRAST
100
BRIGHTNESS
50
SHARPNESS
75
COLOR
50
TINT
0
: MOVE
: ADJ.
: PREV.
MODE
PICTURE
STANDARD
Select this mode to view the factory-presetting standard picture.
Select this mode to view a powerful and clear picture.
DYNAMIC
- watch in the brighter(daylight) environments.
Select this mode to emphasize mildness
MILD
- When it is dark around to lessen the fatigue of eyes.
CUSTOM
Select this mode to view the adjusted picture you want.
20
Press the TV MENU button. Move the
cursor to PICTURE by pressing the CH
/
buttons and press the VOL + or
button.
Move the cursor to PICTURE by
pressing the CH
/
buttons.
Press the VOL +/- or
button.
Whenever this button is pressed, the
mode will change as follows.
STANDARD
DYNAMIC
CUSTOM
MILD
Advertisement
Table of Contents
