Controls And Functions; Control Panel - BenQ PE7800 User Manual

Controls and Functions

Control Panel

1. POWER (Refer to pages 19, 21 and 32 for more
information.)
Press this key for ONE second to turn the
projector on when it is in the standby mode. Or
press this key twice to turn the unit off.
2. ARROWS ( / / / ) (Refer to page 23 for
more information.)
Used to select the desired menu items and to
make adjustments.
3. EXIT
Exits and saves the menu settings.
4. MENU (Refer to page 22 for more information.)
Turns the on-screen display control menu on or
off.
5. MEMORY (Refer to page 20 and 26 for more
information.)
Sequentially recalls settings 1 ~ 3 saved to
memory.
6. INPUT (Refer to page 19 and 24 for more
information.)
Switches input sources sequentially.
7. ENTER (Refer to page 23 for more information.)
Opens the selected item of the menu.
5
4
3
2
1
11
10
8. POWER light
Indicates whether the unit is on or off
The orange light shows when the AC
power cord is plugged into the wall
outlet (standby mode). Once in the
standby mode, you can press the
POWER key on the projector or the ON
key on the remote control for ONE
second to turn the projector on.
The green light shows when the power
is turned on and the projector is
operating.
Flashes orange for the first 60 seconds
during powering up, indicating that the
lamp is warming up.
Flashes orange for two minutes after the
projector is turned off to indicate that
the lamp is cooling.
9. LAMP indicator light (Refer to page 32 for
more information.)
Indicates the status of lamp.
Shows a red light when the lamp has
developed a problem. Please contact your
BenQ dealer for assistance.
10. Zoom Ring (Refer to page 19 for more
information.)
Adjusts the size of the image
Rotate clockwise to enlarge the image or
rotate counter-clockwise to make the
image smaller.
11. Focus Ring (Refer to page 19 for more
information.)
Adjusts the focus of the projected image.
6
7
8
9
Overview 13