Belkin F5D9230-4 User Manual page 105

Troubleshooting
WARNING:
If you are configuring the Wireless Router (or Access
Point) from a computer with a wireless client, you will need to
ensure that security is turned on for this wireless client. If this is not
done, you will lose your wireless connection.
Note to Mac users:
encryption only. Apple AirPort 2 products can support 64-bit or
128-bit encryption. Please check your Apple AirPort product to see
which version you are using. If you cannot configure your network
with 128-bit encryption, try 64-bit encryption.
Problem:
I am having difficulty setting up Wired Equivalent Privacy (WEP)
security on a Belkin client card.
Solution:
The client card must use the same key as the Wireless Router (or
access point). For instance, if your Wireless Router (or access point)
uses the key 00112233445566778899AABBCC, then the client card
must be set to the exact same key.
1.
Double-click the Signal Indicator icon to bring up the "Wireless
Network" screen.
2.
The "Advanced" button will allow you to view and configure
more options of the card.
3.
Once the "Advanced" button is clicked, the Belkin Wireless LAN
Utility will appear. This Utility will allow you to manage all the
advanced features of the Belkin Wireless Card.
4.
Under the "Wireless Network Properties" tab, select a
network name from the "Available Networks" list and click the
"Properties" button.
5.
Under "Data Encryption", select "WEP".
6.
Ensure the check box "The key is provided for me automatically"
at the bottom is unchecked. If you are using this computer to
connect to a corporate network, please consult your network
administrator if this box needs to be checked.
Original Apple AirPort products support 64-bit
103
1
2
3
4
5
6
7
8
9
10
11