Connecting Hdtv - Separate Video/Audio Connections; Cable In; Dvi; Component Video (Ypbpr) - Motorola DCX3400 User Manual

4 CONNECTING YOUR DCX SET-TOP
Connecting HDTV — Separate Video/Audio Connections

Cable In

Connect an RF coaxial cable to the cable wall outlet and the
DCX set-top.

DVI

If your TV has a DVI input, use the DVI connection for your video, connect a HDMI-to-DVI
adapter or cable to the HDMI out connector on the DCX set-top and the
connector on your TV.
Note: A DVI connection supports only the video connection between the DCX set-top
and the HDTV.
To connect your audio connections with your TV speakers, go to
To connect your audio connections for an A/V receiver, go to
to an A/V Receiver —

Component Video (YPbPr)

Connect the component video cables to the Y, Pb, and Pr connectors on your HDTV and
DCX set-top.
Note: This connection supports only the high-definition video connection between the
DCX set-top and the HDTV.
Note: Be sure to match up each signal to the same connection on the TV, otherwise the
colors will not appear correctly on your TV.
To connect your audio connections with your TV speakers, go to
To connect your audio connections for an A/V receiver, go to
to an A/V Receiver —

Audio

If your TV does not have digital audio inputs, connect the stereo audio cable to the
connectors on the DCX3400 set-top and the AUDIO L/R connectors on the
AUDIO L/R
HDTV.
If your TV supports a digital audio inputs, use the digital audio
COAXIAL S/PDIF
quality, including support for Dolby
For information on configuring your DCX set-top settings, go to
Video, and Closed Caption
Audio.
Audio.
outputs instead of the
®
Settings.
outputs. S/PDIF offers better audio
AUDIO L/R
Digital audio.
15
connector on the
CABLE IN
DVI-HDTV
Audio section below.
Connecting Your DCX Set-top
Audio section below.
Connecting Your DCX Set-top
or
OPTICAL S/PDIF
Configuring the Audio,