Installing The Battery - Motorola C300 User Manual

Installing the Battery

Before you can use your phone, you need to install and charge your
battery.
Caution: Do not remove the battery when your phone is on - you may lose
all your personal settings stored either in your SIM card or phone memory.
1 If the battery door is already in place,
push down the battery door release
latch, then slide the door slightly
downward.
2 Pull the cover up and off the phone.
3 Place the battery onto the back of the handset, with the battery's
contacts facing down in alignment with the contacts on the battery
compartment.
4 Push the battery forward into the
compartment.
5 Press the battery down until it clicks
into the compartment.
20 - Getting Started