Table of Contents
Advertisement
SIM Lock (5-4-4)
With this function, you can prevent unauthorised use of the phone with
unknown SIM cards.
After you set this function on, if the SIM card in your phone is not the one
used to enable this function,
will appear after you power
Insert Correct SIM
on and enter the PIN. Press N and enter the unlock code. If the unlock
code entered is correct, the phone will recognise the SIM card
automatically. The next time you power on your phone with this newly
recognised SIM card, you will not be prompted to enter the unlock code
again. However, if the unlock code entered is incorrect, the display will
show
again, and the phone will function as if the SIM
Insert Correct SIM
card were not inserted. Your phone can recognise up to 3 different SIM
cards.
Note: There is a limit of 10 wrong attempts before your phone gets
blocked and becomes unusable.
Set Status
Enables/disables the SIM lock. You need to enter the unlock code first
before you change the SIM lock status. (The default unlock code is
00000000.)
Change Code
Change the unlock code. You will be prompted to enter the original unlock
code first. Enter the original unlock code and new unlock code twice and
press + (
) or N. The length of the code may vary from 1 to 8 digits,
OK
depending on your setting.
Call Barring (5-4-5)
You can set up limitations to restrict outgoing or incoming calls.
104 - Menu Feature Descriptions
Advertisement
Table of Contents
