Motorola C200-1-5 Manual page 82

C200.book Page 82 Wednesday, August 27, 2003 4:50 PM
Clock (8-1-4)
Display the handset's default animation, which is a clock
screensaver. To display the current time, you must first adjust the
time setting. See "Set Time & Date (8-2)" below. Other screensaver
scenarios are the same as those described in "Animation 1 (8-1-2)"
above.
Set Time & Date (8-2)
Sets current date and time to be displayed on the idle screen.To set
the date, use number keys to enter year, month, and day, then
$ )
press ( ) or
A
format), use to enter the hour, then press
minute the same way. You can also use number keys to type the
exact time directly. If you want to clear digits, press & ( ).
Key Lock (8-3)
You can activate the keypad lock to prevent unintentional key-in
actions, say, when you put your phone in a bag. In idle, you can
#
also press and hold
enabled, l will appear at the bottom of the idle mode screen. You
still can answer phone calls by pressing
& (
)
) or , then press
Auto KeyLock (8-3-1)
The key lock will be activated approximately 30 seconds after you
set this mode on.
Lock now (8-3-2)
Activate the key lock immediately.
Off (8-3-3)
Disable the function.
82 - Menus
to confirm. To set current time (24 hr
0
and enter the
to activate the lock. When the lock is
)
. To unlock, press
*
.