Motorola C200-1-5 Manual page 77

C200.book Page 77 Wednesday, August 27, 2003 4:50 PM
Last Call (7-1-2-1)
Shows the cost of the last call.
Note: Network support dependent.
All Calls (7-1-2-2)
Shows the total cost of all calls.
Note: Network support dependent.
Clear Cost (7-1-2-3)
Clears all cost data.
Note: PIN 2 is required.
Tip: PIN2 is a second set of PIN that is used mainly to control
limited services such as call cost limitation and fixed dialling
numbers.
Tip: If entered incorrectly three times in a row, PIN2 will be locked
up. To unblock PIN2, you need to enter the PUK2 code. Call the
operator and ask for PUK2.
Call Rate (3-1-3)
Cost Limit (3-1-3-1)
You can set a limit to the total call cost. Your phone cannot be used
to make a pay call if call cost goes beyond that limit. When this
function is activated, the remaining cost will appear on the screen.
On: Enable the cost limit function.
Note: PIN2 is required.
Off: Disable this function.
Currency (7-1-3-2)
Allows you to enter a preferred currency base for calculating the
cost of your calls.
Note: PIN2 is required.
Menus - 77