Phone Calls - Motorola 6200 User Manual

Phone Calls

To make or receive a phone call, your phone must be switched
on, unlocked and have the antenna fully extended for best
reception.
If the m symbol is showing, your phone has been unable to
find a cellular service. It will not be possible to make or receive
a phone call unless you move to an area where there is a GSM
service. When a service has been found, a series of rising bars,
x, will show the signal strength.
You can make a phone call many different ways;
• Using the digit keys, covered in this section.
• Using the automatic and manual redial methods, covered in
this section.
• Turbo dialling of a Phone Book entry, covered in this
section.
• Calling a Phone Book entry is covered in the Using The
Phone Book Menu section.
• Calling an Embedded Number in a Message is covered in
the Using The Options Menu section.
• Calling one of the last ten phone numbers that you have
called or received a call from is covered in the Using The
Options Menu section.
O selects an option, C will reject or cancel.
Making a Phone Call
The simplest method of making a phone call is to enter the
number, using the digit keys, then press O.
If you make a mistake, press and release the C key to
A
remove the last digit. Holding the C key down will
remove the entire number.
Your phone will then attempt to make the phone call. The
display will show
Calling
made. If the call is not answered, pressing O at this
point will end the attempt.
When the phone call is answered, the display will change to
for a few seconds, followed by
Connected
To end your call press O.
If service is temporarily interrupted during a phone call, the
message
Reconnecting
automatically try to reconnect the call if possible.
Using Your Phone
to show the call attempt is being
End Call?.
may appear. Your phone will
15 English