Set Audible Call Timers - Motorola International 2500 User Manual

Show Total Calls
This option is used to display the total call time, or cost, since
the last meter reset. The total is a combination of home calls
and calls made while roaming.
Once selected, the display will show
appropriate value.
The 'Set Meter Format' option is used to determine which call
value is shown. The rates in the 'Set Call Cost Rates' options
must be set if you wish to display the cost of a call.
Show Home Calls
This option is used to display the total call time, or cost, on
your home network, since the last meter reset.
Once selected, the display will show
appropriate value.
The 'Set Meter Format' option is used to determine which call
value is shown. The rates in the 'Set Call Cost Rates' options
M
must be set if you wish to display the cost of a call.
Show Roaming Calls
This option is used to display the total call time, or cost, on
other networks, since the last meter reset.
Once selected, the display will show
appropriate value.
The 'Set Meter Format' option is used to determine which call
value is shown. The rates in the 'Set Call Cost Rates' options
must be set if you wish to display the cost of a call.
English 48 Using The Options Menu
M Call Related Phone
Features Setup
or and the
Time Cost
or and the
Time Cost
or and the
Time Cost
Network Call Accessory
Selection Meters Setup
Reset All Meters
This option is used to reset the resettable call meters.
O Set Audible Call Timers
Your phone provides two programmable audible call timers:
• The 'Single Alert Timer' will sound a beep just once during
a call, after a preset time has elapsed.
• The 'Repetitive Timer' will sound regular beeps during a
call, at preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.
Single Alert Timer
This option will sound a beep just once during a call, after a
preset time has elapsed.
The option has two settings,
If you change the setting to On, you will be asked to enter a
new preset time by using the digit keys. The preset time
should be between 011 and 999 seconds.
Repetitive Timer
This option will sound regular beeps during a call, at preset
intervals.
The option has two settings,
If you change the setting to On, you will be asked to enter a
new preset interval by using the digit keys. The preset interval
should be between 011 and 999 seconds.
O selects an option, C will reject or cancel.
or Off.
On
or Off.
On