Call Barring - Motorola International 2500 User Manual

Call Holding and Call Waiting Messages
During Call Holding and/or Call Waiting operations, your
phone may display one, or more, of the following messages:
Trying
A request to hold the active call, or swap the active call
with a held call, has been made.
or
A request to reconnect the held call has been made.
Hold Failed
The request to hold a call has been unsuccessful.
Cannot Hold Second Call
A call is already on hold, you cannot place two calls on hold
at the same time.
Reconnect Failed
The held call could not be made active again.
Busy Try Later
M
Your phone is still working on a previous command. Wait a
short time before repeating the command.
English 38 Using The Options Menu
M Call Related Phone
Features Setup
Network Call Accessory
Selection Meters Setup
O Call Barring
Call barring is a network feature which can be used to
selectively bar outgoing and incoming calls.
If you change the barring setting, you may be asked to enter
your barring password. There will be a short delay while the
phone notifies the network of the new setting. When the
change has been made by the network, the phone will display
a confirmation message.
The initial password will be supplied to you by your Cellular
Service Provider when you subscribe to this service.
Bar Outgoing Calls
After selecting this option, there will be a short delay while
the phone asks the network for the current setting.
Barring Int'l Calls
When selected, this option will bar outgoing international
calls.
Barring Int'l Calls Except to Home
When selected, this option will bar outgoing international
calls, except those to your home country.
All Calls
When selected, this option will bar all outgoing calls, except
emergency calls.
Off
When selected, this option will disable all call barring for
outgoing calls.
O selects an option, C will reject or cancel.