3D Projection :
This function is only for 3D contents and must wear 3D glasses.
TI DDP DDP2430
Does not support FRC (Frame Rate
•
Conversion)
Can not support HQFS 60Hz 3D source
•
from DVD which need to go thru FRC
Can only support 120Hz 3D source from
•
PC (VGA/DVI/HDMI)
OSD :
Add "3D", "3D Sync Invert" in Image Page
−
"3D Sync Invert" is adjustable when above "3D" is on. Otherwise 反白
−
When 3D is enabled, Display Mode(in Color Page) is not adjustable (反白).
−
For DDP2430 models : 3D / 3D Sync Invert , only appear for VGA/DVI/HDMI source.
−
Disappear if other sources.
For DDP2230/2431 models : no this limitation.
−
Reminder screen
Pop-up screen and appear 10 sec in the center of the screen. End-users can press
−
Menu to exit within 10 sec.
(1) When 3D enable, this screen will appear after exit OSD menu.
−
(2) There has reminder screen if 3D still enable when power on projector.
−
Priority : PWD login screen (Security fn is on)
−
Screen
Timer and other OSD pup-up fn.
TI DDP DDP2431
Support FRC (Frame Rate Conversion)
•
Can support HQFS 60Hz 3D source from
•
DVD which need to go thru FRC
Can support 120Hz 3D source from PC
•
Lamp life reminder
9
3D reminder