Table of Contents
Advertisement
Chapter 1 — Introduction
Quick Start
Turning on the Computer for the First Time
1. Connect the power cord
to the AC adapter.
2. Connect the AC adapter
to the DC power port on
the rear of your
computer.
3. Connect the AC adapter
power cord to an AC
outlet.
4. Open the LCD panel to
a comfortable viewing
angle.
5. Press the power button
to turn on the power.
Adjusting the Volume
You can adjust the volume with hot key combination as below:
• Fn + F8 decreases the volume
• Fn + F9 increases the volume
• Fn + F10 Mute the volume
Note: The battery is not fully charged.
Allow your battery to fully charge before
using it (i.e., before disconnecting AC
power). Calibrating the battery before use
is also highly recommended. Refer to
Chapter 5, Power Management, for further
information.
Advertisement
Table of Contents
