Adding Background Music - Ulead PYRO1394DV User Manual

106
ULEAD VIDEOSTUDIO USER GUIDE

Adding background music

Set the tone of your movie with the background music of your
choice. VideoStudio can record and convert song tracks from your
CD into WAV files and then insert them onto the Timeline.
VideoStudio also supports MP3 files and other popular audio file
formats which you can directly insert onto the Music Track.
To add music from an audio CD:
1. Click the Music & Voice tab.
2. Insert the audio CD into your CD
drive.
3. To check if the disc is detected, see to
it that Disc and Track in the Options
Panel are enabled. Choose your
desired song track from the Track
drop-down list.
4. Click Play Selected Track to listen to the selected song track.
When you are ready to record the song track into the Timeline,
click Record Selected Track.
5. Press [Esc] or click Stop to stop recording.
When you load or add an audio track from an audio CD into the
Library or Timeline, VideoStudio converts the CDA audio file to
WAV. The converted file is saved in your working folder.
Note: You cannot record over an existing clip. When a clip is
selected, recording is disabled. Make sure that a clip is not selected
by clicking on an empty area on the Timeline.